BPDLL - CO60, COBALT OXIDE

  • MSDS: BPDLL
  • Manufacturer: SPEX INDUSTRIES INC
  • Product Name: CO60, COBALT OXIDE
  • National Stock Number: 6810-00N030022
Product Identification

Product ID:CO60, COBALT OXIDE
MSDS Date:06/08/1989
FSC:6810
NIIN:00N030022
MSDS Number: BPDLL

Responsible Party
SPEX INDUSTRIES INC
3880 PARK AVE
EDISON, NJ 08820
US

Emergency Phone: 908-549-7144

Info Phone: 908-549-7144

Preparer: LINDA OLCHUARY

Cage: 07977

Contractor
SPEX CERTIPREP INC
METUCHEN, NJ 08840 US

Telephone: 732-549-7144

Cage: 07977

Ingredients

COBALT (2+) OXIDE; (COBALT OXIDE)

CAS: 1307-96-6

RTECS: GG2800000

Fraction By Weight: 100%

OSHA PEL 0.05 MG/M3 (CO)

ACGIH TLV: 0.05 MG/M3 (CO)

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT)202 MG/KG.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MATERIAL MAY BE HARMFUL IF INHALED,
INGESTED OR CONTACTED W/SKIN OR EYES. CONTACT W/SKIN CAN CAUSE
DERMATITIS OR IRRITATION, CONTACT W/EYES CAN BE IRRITATING.
INHALATION CAN IRRITATE MUCOUS MEMBRANES & UPPER RESPIRATORY
TRACT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:IF IRRITATION CONTINUES, GET MD IMMEDIATELY. EYES:FLUSH
W/WATER FOR AT LEAST 15 MINUTES OCCASIONALLY LIFTING UPPER & LOWER
EYELIDS. SKIN:REMOVE CONTAMINATED CLOTHING, THEN FLUSH W/WATER FOR
AT LEAST 1 5 MINUTES. WASH CLOTHING THOROUGHLY BEFORE REUSE.
INHAL:MOVE TO FRESH AIR. INGEST:CALL MD IMMEDIATELY .

Fire Fighting

Flash Point:NOT COMBUSTIBLE
Extinguishing Media:APPROPRIATE TO SURROUNDING FIRE CONDITIONS.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE

Accidental Release

Spill Release Procedures:EVACUATE & VENTILATE AREA. SWEEP UP & PLACE IN
BAG, HOLD PROPER DISPOSAL. WEAR PROTECTIVE CLOTHING.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY AREA, IN A
TIGHTLY SEALED CONTAINER. PROTECT FROM MOISTURE SINCE MATERIAL IS
HYGROSCOPIC. IRRITANT.
Other Precautions:AVOID INHAL, INGEST & CONTACT W/EYES & SKIN.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:USE IN A CHEMICAL FUME HOOD.
Protective Gloves:CHEMICAL RESISTANT GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WEAR CHEMICAL RESISTANT CLOTHING. LAB COAT.
Work Hygienic Practices:WASH CAREFULLY AFTER USE.
Supplemental Safety and Health
MP:1795 +/- 20.

Chemical Properties

HCC:N1
Melt/Freeze Pt:M.P/F.P Text:SUPP DATA
Spec Gravity:6.45
Solubility in Water:INSOLUBLE
Appearance and Odor:PINK POWDER

Stability

Stability Indicator/Materials to Avoid:YES
MOISTURE & REDUCING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC FUMES.

Disposal

Waste Disposal Methods:CONTACT LOCAL HAZARDOUS OR CHEMICAL WASTE
DISPOSAL AGENCY FOR REGULATIONS. DISPOSAL MUST BE I/A/W FEDERAL,
STATE & LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.